Ride long. Ride hard.
Our GT27 650B wheelsets are built to be light, strong, and durable. Whether powering up gravel climbs, shredding singletrack, or loading up for a multi-day bikepacking adventure, you won't find a more capable wheelset.
Starting with a lightweight XC mountain bike rim, we hand-built them with DT350 hubs and 28 top-quality spokes for a high-performance wheelset designed to last for years.
Developed in partnership with factories behind some of the industry's leading high-end wheel brands, every Thesis wheelset is professionally hand-built and digitally checked to ensure a lifetime of trouble-free riding.
Wheelset weight: 1495g (+/- 2.5%)
Ultra-wide. Tubeless. Carbon.
With an extreme 27.3mm internal width and a tubeless hookless design, our confidence-inspiring rims allow higher-volume tires to be run at ultra low pressures for greater traction, comfort, and control.
A 3mm offset profile with angled drilling balances out spoke tensions and bracing angles, making our wheels laterally stiffer and more durable.
The venerated DT Swiss DT350 hubset
We believe in investing where it counts. That’s why we went with one of the strongest, most reliable hubs in the industry.
The DT350 rear hub features the famed star ratchet engagement system, which is twice as strong and five times more durable than most competing pawl-based systems. Strong and durable enough for downhill racing and loaded touring, these lightweight hubs are an obvious choice for a wheelset built to last.
Laser-focused on every last detail
Many wheelsets will use ultra low spoke counts to shave weight at the expense of stiffness and durability. We went with 24 lightweight cold-forged bladed aero spokes, built by hand, for a wheel that’s stiffer, stronger, more durable, and just as fast.
A single length of spoke is used throughout, making them easy to source and replace. We also use exposed brass nipples, prized by mechanics for their durability and serviceability.
DETAILS- 650B | 27.4mm internal | 33mm wide | 24.5mm deep
- Optimized for 47mm+ tires
- Tubeless-ready hookless design, also compatible with standard tubed tires
- 3mm offset, angle drilling, & reinforced nipple seat
- Toray 700/800 construction
- 350g +/- 5%
WHY WE CHOSE ITAn adventure-lover that's optimized to support popular 47mm gravel tires at low pressures, our GT27 Carbon 650B rims offer maximumized tire volume for compliance, traction, and stability in the dirt. They feature 3mm of offset, angled spoke hole drilling, and a reinforced nipple seat for high and balanced spoke tensions, which in turn create a stiffer, stronger, and more durable wheelset. Their hookless design improves impact strength and tire stability at low pressures. With a bias toward comfort and traction, these rims are great for technical gravel, bike-packing, speed commuting, and speed touring.
DETAILS- Famously bombproof 18t "Star Ratchet"
- (4) premium 6902 sealed, large-ball cartridge bearings
- Centerlock rotor interfaces for easy rotor removal/installation when travelling
- 24 hole straight pull flanges
- 12 x 142mm thru-axle (convertible to other standards)
- Shimano Road or SRAM XDR freehub with spacer for Shimano Road or SRAM XD
WHY WE CHOSE ITExtreme loads and environmental stresses make rear hubs notoriously prone to failure. That's why we invested in DT Swiss's rightfully venerated DT350 rear hub. It features the famously strong and durable Star Ratchet engagement system, large 6902 sealed cartridge bearings, tool-less serviceability and convertibility to other axle or freehub standards, and a centerlock interface for easy rotor installation and removal.
This hub is twice as strong and 3-5x more expensive than the traditional pawl-based models some brands employ to reduce cost, and weighs only a few grams more than the under-built models often employed to achieve attention grabbing weights at the expense of durability.
We've reviewed the testing data, talked to mechanics, and have been abusing DT Star Ratchet hubs ourselves for over 15 years. Whether you're ripping it up on singletrack, touring through some remote wilderness, or simply putting in long miles year after year, these are the hubs you'll want to trust to keep you going.
You can learn more about DT's Star Ratchet engagement system here.
DETAILS- (2) premium 6802 sealed cartridge bearings
- Centerlock rotor interface
- 24h straight pull flanges
- 12 x 100mm thru-axle
- 136g +/- 5%
WHY WE CHOSE ITDT350 front hubs are famously durable, serviceable, and adaptable. They also achieve their light weight without resorting to durability-compromising tricks. What do we mean? Just as there are brands that will use failure-prone aluminum nipples to shave grams, there are others who may spec a hub with tiny bearings and a narrow hub shell to achieve an eye-catching weight. However, those small bearings wear out fast, and that narrow shell may not withstand the torsional loads associated with disc brakes.
DETAILS- Cold forged
- Aero bladed
- Sandvik T302+ stainless (Sweden)
- Straight pull
- Single length
- 4.3g each
WHY WE CHOSE ITWhy invest so much on so many fancy bladed spokes? Because the same cold-forging process that turns a length of round straight-gauge wire into a light and aero bladed spoke also improves strength-to-weight and elastication by realigning the grain flow of the metal and reducing its cross-sectional area. The result is a spoke that can be run at high tension while experiencing less change in tension and thus fatigue with each wheel rotation or impact. Furthermore, unlike cheaper round "butted" spokes that are in fact cold-forged in a similar process, bladed spokes can easily be built into a wheel and later trued without inducing spoke wind-up, further extending the life of the wheel. To cap it off, we went with a single length of straight pull spoke to make it easier to find should one fail, and avoided low spoke counts to make it unlikely one ever will.
DETAILS- Durable brass
- Resist seizing, splitting, & other failure modes
- Can be trued with tires and rim-tape in place
- 1g each
WHY WE CHOSE ITWhy do mechanics love externally adjustable brass nipples? Aluminum nipples are a trick used by some brands achieve attention-grabbing weights at the expense of durability and serviceability. Aluminum oxidizes and is much softer than brass, making aluminum nipples notoriously prone to seizure, splitting, and failure. The result is that a simple wheel true can turn into a costly rebuild with new nipples and spokes. Weight savings? Less than 18 grams per wheel.
As for the hidden nipples used by some uber expensive brands, no one envies having to remove your tires, sealant, rim tape, and valve stems just to perform necessary maintenance. Aerodynamic advantage? Zero. Zilch. Nada.
DETAILS- Each wheel is built by a single, skilled professional
- 2-cross lacing for lateral and rotational strength
- 24 spokes for durability and stiffness
WHY WE CHOSE ITStrong, durable wheels require more than the best components. That's why we invested having our wheels professionally hand-built and machine checked. With a professional touch-up at 1200 miles and regular check-ups for tension and true, our wheels will continue to perform year after year.